Moldex 2200N95 Particulate Respirator -
MEDIUM/LARGE
Use Against:
Particulate aerosols free of oil.
Do Not Use Against:
Concentration of contaminants wich are unknown, or are immediately dangerous
to life or health.
Concentrations of particulantes which exceed the maximum use concentration or
10 times the OSHA Permissible Exposure Limit, whichever is lower.
Gases, vapors, asbestos, paint spray, sandblasting or particulate
materials which generate harmful vapors. Oil-based mists.
Restrictions:
This respirator does not supply oxygen and must not be used in atmospheres
containing less than 19.5% oxygen. Do not remain in contaminated area
if any physical distress occurs, for example breathing difficulty, dizziness
or nausea. Leave contaminated area and replace respirator if it is
damaged, distorted, a proper fit can not be obtained or breathing becomes
difficult. Inspect filter media and staple area prior to each use for
tears and damage. Staple perforations do not effect NIOSH approval.
Do not alter, modify, or abuse this respirator. Store unused
respirators in a box in a clean, dry non-contaminated area. Dispose of
respirator according to your employer's policy and local regulations.
Dispose no later than thirty days after use. Use respirator
before the "use by" expiration date printed on box.
Warning
To User:
Follow all instructions and warnings on the use of this respirator and
wear during all times of exposure. Failure to do so will reduce respirator
effectiveness, wearer protection and may result in sickness or death.
Before use, the user must first be trained by the employer in proper
respirator use, in accordance with applicable safety and health standards,
for the contaminant and exposure level in the assinged work area. The
particulates and other contaminates which can be dangerous to your health
include those which you cannot see, taste, or smell. This product has
not been sold with warnings or use instructions for personel involved in
healthcare or related situations, where there may be the possibility of
contact with disease or biological hazards. If you are considering such
uses, first call the Moldex Technical Service Dept., 310/837-6500 or
800/421-0668.
|