|
SMOOTH MAX Graffiti Remover
SMOOTH MAX® graffiti remover is one of five "Graffiti
Max" products, each custom formulated for specific graffiti removal needs.
If it is a "smooth and durable" surface, SMOOTH MAX is the right
choice for the job.
Recommended for removal on:
Metals: Steel, stainless, aluminum, galvanized, brass, copper,
anodized aluminum, zinc.
Glass: All types of glass, glazed tiles, ceramic, porcelain, polished
stone; such as marble, granite.
Durable Painted: Factory applied baked on paint or catalyzed paint
such as auto, truck, bus, heavy equipment, utility boxes, construction
trailers, boxcars or similar.
Durable Plastics: Fiberglass, polyethylene or polypropylene portable
toilets or bathroom partitions, laminated wood, plexiglas, Lexan, vinyl
siding.
|
|
Smooth Max
- Aluminum - Garage Door
|
|
BEFORE
|
AFTER
|
Method:
Sprayed one coat of Smooth Max, 20 minute dwell time, agitated with a
white 3M Scotch Brite pad and flushed off with warm low pressure water.
Place:
Minneapolis, MN
Job Time:
45 minutes
Substrate:
Baked Finish Aluminum Overhead Door - Commercial Bldg.
Job Notes:
Outside air temperature 35° F.
|
|
Features & Benefits:
•Sprayable thickened liquid clings to surfaces without messy drips
and runs.
•Fast removals - just a few minutes for most uses
•Low odor with minimum or no ventilation requirement for added safety,
indoors or out.
•Nonflammable, non-combustible for added safety in use.
•All temperature effective removals from freezing cold to very hot
conditions.
|
|
Smooth Max
- Aluminum - Truck
|
|
BEFORE
|
AFTER
|
Method:
Spray Smooth Max on, let dwell for 20 minutes. Hand agitated heavy
areas. Warm water flush to remove tag.
Place:
South Minneapolis Florist
Job Time:
1 hour 15 minutes
Substrate:
Factory painted aluminum gloss finish
Job Notes:
Outside air temperature 70° F. Removed graffiti without damage to
paint or truck body
|
|
General Instructions:
•SHAKE BEFORE USE.
•Should be tested first in an inconspicuous area for effect on any
painted or plastic surface.
•Apply by spray, brush, roller or pump sprayer.
•Allow to penetrate marks for several minutes (30-40 minutes cold
temperatures).
•Use gentle agitation with stiff brush or looped Teflon pad.
•Remove with a clean dry cloth or rinse off with water hose or
pressure washer.
•Use water rinse or soap and water followed by water rinse for
cleaning equipment.
•Repeat process if necessary.
|
|
Smooth Max
- Plastic - Playground Equipment
|
|
BEFORE
|
AFTER
|
Method:
Using rubber gloves spray Smooth Max directly on to affected area.
Allow to dwell for 5 minutes agitate with soft nylon brush or cloth. Wipe
affected area clean with damp cloth.
Place:
Roseville. MN
Job Time:
10 minutes
Substrate:
Plastic playground equipment
Job Notes:
Outside air temperature 90°F.
|
|
Safety Instructions For Use:
•Always wear protective eyewear and chemical resistant gloves
during handling and use.?
•Protect all exposed skin areas with chemical resistant covering.
•If product gets on skin, wash off immediately. If product gets in
eyes, flush with water for 15 minutes.
•FOR PROFESSIONAL USE ONLY.
|
|
Smooth Max
- House - Siding
|
|
BEFORE
|
AFTER
|
Method:
Sprayed one coat of Smooth Max, 20 minute dwell time, agitated with a
white 3M Scotch Brite pad and flushed off with warm low pressure water.
Place:
St. Paul, MN
Job Time:
45 minutes
Substrate:
Vinyl Siding - Private Residence.
Job Notes:
Outside air temperature 35° F..
|
|
Specifications
Consistency: Sprayable thickened liquid clings to vertical surfaces
without dripping.
Coverage: Non-porous surfaces 200 to 400 Sq. ft./gal.
Use Temperatures: Use in temperatures down to 25°F, will work slower
at colder temperatures.
Storage: Stores between 40°F and 130°F. DO NOT FREEZE. If frozen,
thaw and remix before using. Keep out of the reach of children.
Flammability: Nonflammable, non-combustible. Flash point over 200°F.
V.O.C.'s: .2 lbs/gallon, 25 grams/liter H.A.P.S. - none.
Volatility: Very low rate of evaporation. Ventilation required in a
confined space.
Biodegradable: Yes
Shipping: Not regulated, D.O.T. Proper shipping name: Cleaning
Compound N.O.S., Class 55.
Effective On: Spray paint graffities, marker, pen, ink, crayon, shoe
polish, lipstick, pencil, adhesive residue, and most other graffiti marks and
stains.
|
|
Smooth Max
- Powdercoat - Pole
|
|
BEFORE
|
AFTER
|
Method:
Using rubber gloves spray Smooth Max directly on to affected area.
Allow to dwell for 5 minutes agitate with soft nylon brush or cloth. Wipe
affected area clean with damp cloth.
Place:
Roseville. MN
Job Time:
5 minutes
Substrate:
Powder coated aluminum pole in public park.
Job Notes:
Outside air temperature 90°F.
|
|
Other Uses:
SMOOTH MAX® Graffiti Remover removes road tar, asphalt, tree sap, and
many other difficult to remove graffities from durable smooth surfaces or
wood.
|
|
Smooth Max
- Bronze - Statues
|
|
BEFORE
|
AFTER
|
Method:
Brushed Smooth Max on, with a dwell time of 25 minutes, warm water
flush. Reapplied Smooth Max with an additional 15 minute dwell time. Repeated
warm water flush.
Place:
Minneapolis, MN
Job Time:
1.25 hours
Substrate:
Bronze
Job Notes:
Bronze statues were cast in 1887 and placed in front of a fraternity house
on the University of Minnesota Campus. Latex paint poured over the top of the
statues. Outside air temperature 34° F.
|
|
For removing graffities or shadows from porous surfaces such as
brick, cement, grout, etc., we recommend using our ELEPHANT SNOT® Graffiti
Remover or SHADOW MAX®.
|
